Using silent mode to install GC 10.2.0.1 and upgrade GC to 10.2.0.5 by Using an Existing Database on

  • djb1008

    2010-08-09 13:22:42
  • Oracle
  • 原创

本文主要描述在Redhat Linux5.3_X86上如何安装Grid Control 10.2.0.1,并升级到新的版本(10.2.0.5),具体的步骤分为:

  1. 安装前配置OMS SERVER环境,配置REPOSITORY DB 环境,具体内容请参看我的博客文章http://djb1008.itpub.net/post/42280/502790 ;
  2. 使用静默方式(silent)安装Grid Control 10.2.0.1,不进行任何配置(安装时选择noconfig选项,只安装软件);
  3. 使用静默方式(silent)升级oms 到10.2.0.5,不进行任何配置(安装时选择noconfig选项,只安装软件);
  4. 使用静默方式(silent)升级agent 到10.2.0.5,不进行任何配置(安装时选择noconfig选项,只安装软件);
  5. 运行ConfigureGC.pl,进行本次安装唯一一次的配置操作,本次操作耗时最长(1个小时);
[@more@]

    本文下面将Grid Contol 简称为GC.

    一. 安装前配置OMS SERVER环境,配置REPOSITORY DB 环境

    关于OMS SERVER环境准备,REPOSITORY DB环境准备的环节，请参看我的博客文章http://djb1008.itpub.net/post/42280/502790 里的"一.OMS SERVER环境准备,REPOSITORY DB环境准备"环节,这里不再累述。

    本次安装也是选择了使用已有数据库存放资料数据.

    在安装前如果有条件,最好调整一下repository db的system表空间的大小,笔者有一次因为system空间不够,导致了GC配置的失败.system表空间有条件的话,最好调到800M及以上.

    repository db:

    SQL>alter database datafile 1 resize 800m;

    另外,如果环境中已经安装过GC,则需要额外地做一些清除的工作,具体的描述如下:

    Oms server:

    #rm -rf /oracle/OracleHomes

    #rm -rf /etc/oratab

    #rm -rf /etc/oraInst.loc

    #rm -rf /etc/rc.d/init.d/gcstartup

    #rm -rf /usr/local/bin/oraenv

    #Ps -ef|grep ora

    #ps -ef|grep oms

    查看oms server上有没有oracle 的进程,oms进程存在

    #reboot

    Repository db server:

    $/oracle/OracleHomes/agent10g/bin/emctl stop agent

    $rm -rf /oracle/OracleHomes

    #rm -rf /etc/rc.d/init.d/gcstartup

    #ps -ef|grep agent

    二. 静默方式(silent)安装GC 10.2.0.1,只安装软件,不进行配置(OMS Server上执行)

  1. 编辑responseFile

    $cd /setup

    $ls

    gc_102011_linux.zip

    $unzip gc_102011_linux.zip

    $cd /setup/Disk1/response

    $cat em_ussing_existing_db.rsp|grep -v ^#|grep -v ^$>em_using_existing_db2.rsp

    $vi em_using_existing_db2.rsp

    $more /setup/Disk1/response/em_using_existing_db2.rsp

    RESPONSEFILE_VERSION=2.2.1.0.0

    UNIX_GROUP_NAME="oinstall"

    FROM_LOCATION="../oms/Disk1/stage/products.xml"

    BASEDIR="/oracle/OracleHomes"

    INSTALLATION_NAME="oms10g"

    NEXT_SESSION=true

    NEXT_SESSION_ON_FAIL=true

    DEINSTALL_LIST={"oracle.sysman.top.oms","10.2.0.1.1"}

    SHOW_DEINSTALL_CONFIRMATION=true

    SHOW_DEINSTALL_PROGRESS=true

    REMOVE_HOMES="/oracle/OracleHomes/oms10g"

    ACCEPT_LICENSE_AGREEMENT=true

    TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","10.2.0.1.1"}

    COMPONENT_LANGUAGES={"en"}

    s_reposHost="ocmdb1"

    s_reposPort="1521"

    s_reposSID="gridctl"

    s_reposDBAPwd="mypwd**"

    s_mgmtTbsName="/oracle/oradata/gridctl/mgmt.dbf"

    s_ecmTbsName="/oracle/oradata/gridctl/mgmt_ecm_depot1.dbf"

    s_securePassword="mypwd**"

    s_securePasswordConfirm="mypwd**"

    b_lockedSelected="false"

    s_reposPwd="mypwd**"

    s_reposPwdConfirm="mypwd**"

    n_firstInstanceValidation=2

    n_firstReposValidation=1

    n_firstReposPwdValidation=2

    n_firstSecureValidation=2

    n_firstVldnEmailSer=2

    b_upgrade=false

    b_showOptConfigPage=TRUE

    s_installType="NOSEED"

    红色标出的内容,是需要根据实际情况,进行手工编辑的.

  2. 进行静默的安装

    $cd /setup/Disk1

    $./runInstaller -ignoreSysPrereqs -noconfig -silent -responseFile /setup/Disk1/response/em_using_existing_db2.rsp -force use_prereq_checker=false

    安装程序执行到最后,提示使用root身份执行两个文件:

    #!/bin/sh

    #Root script to run

    /oracle/oraInventory/orainstRoot.sh

    /oracle/OracleHomes/oms10g/allroot.sh

    To execute the configuration scripts:

    1. Open a terminal window

    2. Log in as "root"

    3. Run the scripts

    [root@ocmdb2 response]# /oracle/oraInventory/orainstRoot.sh

    Changing permissions of /oracle/oraInventory to 770.

    Changing groupname of /oracle/oraInventory to oinstall.

    The execution of the script is complete

    [root@ocmdb2 response]# /oracle/OracleHomes/oms10g/allroot.sh

    Starting to execute allroot.sh .........

    Starting to execute /oracle/OracleHomes/oms10g/root.sh ......

    Running Oracle10 root.sh script...

    nThe following environment variables are set as:

    ORACLE_OWNER= oracle

    ORACLE_HOME= /oracle/OracleHomes/oms10g

    Enter the full pathname of the local bin directory: [/usr/local/bin]:

    The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)

    [n]: y

    Copying dbhome to /usr/local/bin ...

    Copying oraenv to /usr/local/bin ...

    The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)

    [n]: y

    Copying coraenv to /usr/local/bin ...

    nCreating /etc/oratab file...

    Adding entry to /etc/oratab file...

    Entries will be added to the /etc/oratab file as needed by

    Database Configuration Assistant when a database is created

    Finished running generic part of root.sh script.

    Now product-specific root actions will be performed.

    Finished execution of /oracle/OracleHomes/oms10g/root.sh ......

    Starting to execute /oracle/OracleHomes/agent10g/root.sh ......

    Running Oracle10 root.sh script...

    The following environment variables are set as:

    ORACLE_OWNER= oracle

    ORACLE_HOME= /oracle/OracleHomes/agent10g

    Enter the full pathname of the local bin directory: [/usr/local/bin]:

    The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)

    [n]: y

    Copying dbhome to /usr/local/bin ...

    The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)

    [n]: y

    Copying oraenv to /usr/local/bin ...

    The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)

    [n]: y

    Copying coraenv to /usr/local/bin ...

    Entries will be added to the /etc/oratab file as needed by

    Database Configuration Assistant when a database is created

    Finished running generic part of root.sh script.

    Now product-specific root actions will be performed.

    Finished product-specific root actions.

    Finished execution of /oracle/OracleHomes/agent10g/root.sh ......

    我们可以查看安装的滚动文档:

    $tail -f /oracle/oraInventory/logs/installActions2010-08-06_10-53-16AM.log

  3. 安装完成GC 10.2.0.1软件后,结果如下:

    [oracle@ocmdb2 OracleHomes]$ opmnctl status

    Processes in Instance: EnterpriseManager0.ocmdb2

    -------------------+--------------------+---------+---------

    ias-component | process-type | pid | status

    -------------------+--------------------+---------+---------

    DSA | DSA | N/A | Down

    HTTP_Server | HTTP_Server | N/A | Down

    LogLoader | logloaderd | N/A | Down

    dcm-daemon | dcm-daemon | N/A | Down

    OC4J | home | N/A | Down

    WebCache | WebCache | N/A | Down

    WebCache | WebCacheAdmin | N/A | Down

    [oracle@ocmdb2 OracleHomes]$ ps -ef|grep oms

    oracle 6971 1 0 10:57 ? 00:00:00 /oracle/OracleHomes/oms10g/opmn/bin/opmn -d

    oracle 6973 6971 0 10:57 ? 00:00:00 /oracle/OracleHomes/oms10g/opmn/bin/opmn -d

    oracle 8814 4353 0 11:12 pts/1 00:00:00 grep oms

    [oracle@ocmdb2 OracleHomes]$ opmnctl stopall

    opmnctl: stopping opmn and all managed processes...

    [oracle@ocmdb2 OracleHomes]$ ps -ef|grep opmn

    oracle 8840 4353 0 11:12 pts/1 00:00:00 grep opmn

    [oracle@ocmdb2 OracleHomes]$ pwd

    /oracle/OracleHomes

    [oracle@ocmdb2 OracleHomes]$ du -sm *

    406 agent10g

    1254 oms10g

    安装GC 10.2.0.1_X86 后的目录空间占用情况,这个可以和后面升级完成做一个比较.

    [oracle@ocmdb2 OracleHomes]$ opmnctl stopall

    opmnctl: opmn is not running

    停止opmnctl,为后面的升级做准备.

    #mv /etc/rc.d/init.d/gcstartup /etc/rc.d/init.d/gcstartup.new

    禁止os启动是启动oms和agent

  4. 升级前对GC 10.2.0.1做一个目录备份

    安装完10.2.0.1后,最好在升级前进行一次目录备份,这样下次出现问题后就可以直接恢复了(注意要包括oraInventory目录)

    #tar -cvf /setup/gc10201_noconfig.tar /oracle

    #reboot

    重新启动OS

    三. 使用静默方式,升级OMS到10.2.0.5 (OMS Server上执行)

  5. 解压缩patch安装文件

    $cd /setup

    $unzip p3731593_10205_LINUX.zip

  6. 编辑reponseFile

    $cd /setup/3731593/Disk1/response

    $cat patchset.rsp |grep -v ^#|grep -v ^$>patchset2.rsp

    $vi patchset2.rsp

    $more patchset2.rsp

    RESPONSEFILE_VERSION=2.2.1.0.0

    UNIX_GROUP_NAME=oinstall

    FROM_LOCATION="../stage/products.xml"

    ORACLE_HOME="/oracle/OracleHomes/oms10g"

    b_softwareonly=true

    b_startOMS=true

    s_sysPassword="mypwd**"

    TOPLEVEL_COMPONENT={"oracle.sysman.patchset","10.2.0.5.0"}

    DEINSTALL_LIST={"oracle.sysman.patchset","10.2.0.5.0"}

    SHOW_SPLASH_SCREEN=true

    SHOW_WELCOME_PAGE=false

    SHOW_SUMMARY_PAGE=true

    SHOW_INSTALL_PROGRESS_PAGE=true

    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true

    SHOW_CONFIG_TOOL_PAGE=true

    SHOW_XML_PREREQ_PAGE=true

    SHOW_END_OF_INSTALL_MSGS=true

    SHOW_ROOTSH_CONFIRMATION=true

    SHOW_END_SESSION_PAGE=true

    SHOW_EXIT_CONFIRMATION=false

    sl_pwdInfo="mypwd**"

    n_validate=1

    oracle.iappserver.st_midtier:szl_InstanceInformation="mypwd**"

    ACCEPT_LICENSE_AGREEMENT=true

    DECLINE_SECURITY_UPDATES=true

    红色标出的内容,需要根据实际情况进行编辑.

  7. 运行命令,使用静默方式升级OMS到10.2.0.5

    $cd /setup/3731593/Disk1/

    $ ./runInstaller -ignoreSysPrereqs -silent -noconfig -responseFile /setup/3731593/Disk1/response/patchset2.rsp

    The following configuration scripts need to be executed as the "root" user.

    #!/bin/sh

    #Root script to run

    /oracle/OracleHomes/oms10g/root.sh

    To execute the configuration scripts:

    1. Open a terminal window

    2. Log in as "root"

    3. Run the scripts

    使用root身份运行root.sh文件

    #/oracle/OracleHomes/oms10g/root.sh

  8. 静默方式升级OMS到10.2.0.5后的一些结果

    [oracle@ocmdb2 ~]$ cd /oracle

    [oracle@ocmdb2 oracle]$ ls

    OracleHomes oraInventory

    [oracle@ocmdb2 oracle]$ cd OracleHomes/

    [oracle@ocmdb2 OracleHomes]$ ls

    agent10g oms10g

    [oracle@ocmdb2 OracleHomes]$ du -sm *

    406 agent10g

    1853 oms10g

    可以看到oms10g 子目录由原来的1254M 增加到1853M;而agent10g没有任何变化.

    四. 使用静默方式,升级AGENT到10.2.0.5 (OMS Server上执行)

  9. 编辑reponseFile

    $cd /setup/3731593/Disk1/response

    $cp patchset2.rsp patchset3.rsp

    $vi patchset3.rsp

    $more patchset3.rsp

    FROM_LOCATION="../stage/products.xml"

    ORACLE_HOME="/oracle/OracleHomes/agent10g"

    b_softwareonly=true

    b_startOMS=true

    s_sysPassword="mypwd**"

    TOPLEVEL_COMPONENT={"oracle.sysman.patchset","10.2.0.5.0"}

    DEINSTALL_LIST={"oracle.sysman.patchset","10.2.0.5.0"}

    SHOW_SPLASH_SCREEN=true

    SHOW_WELCOME_PAGE=false

    SHOW_SUMMARY_PAGE=true

    SHOW_INSTALL_PROGRESS_PAGE=true

    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true

    SHOW_CONFIG_TOOL_PAGE=true

    SHOW_XML_PREREQ_PAGE=true

    SHOW_END_OF_INSTALL_MSGS=true

    SHOW_ROOTSH_CONFIRMATION=true

    SHOW_END_SESSION_PAGE=true

    SHOW_EXIT_CONFIRMATION=false

    sl_pwdInfo="mypwd**"

    n_validate=1

    oracle.iappserver.st_midtier:szl_InstanceInformation="mypwd**"

    ACCEPT_LICENSE_AGREEMENT=true

    DECLINE_SECURITY_UPDATES=true

    红色标出的内容,需要根据实际情况进行编辑.

    另外要注意的是本文patchset3.rsp与OMS升级的patchset2.rsp,只有一个地方不相同,就是ORACLE_HOME设置不同,这里需要设置为agent的安装目录

  10. 运行runInstaller命令,进行静默升级安装.

    $cd /setup/3731593/Disk1/

    $./runInstaller -ignoreSysPrereqs -silent -noconfig -responseFile /setup/3731593/Disk1/response/patchset3.rsp

    The following configuration scripts need to be executed as the "root" user.

    #!/bin/sh

    #Root script to run

    /oracle/OracleHomes/agent10g/root.sh

    To execute the configuration scripts:

    1. Open a terminal window

    2. Log in as "root"

    3. Run the scripts

    #/oracle/OracleHomes/agent10g/root.sh

    打开另外一个窗口,使用root身份,运行root.sh.

  11. 静默方式升级agent到10.2.0.5后的一些结果

    [root@ocmdb2 OracleHomes]# du -sm *

    568 agent10g

    1853 oms10g

    可以看到agent10g 子目录由原来的406M 增加到568M;而oms10g没有任何变化.

  12. 再进行配置前,备份一下GC 10.2.0.5的运行环境

    #cd /setup

    #tar -cvf /setup/gc_10205_noconfig.tar /oracle

    #ps -ef|grep oms

    #ps -ef|grep opmnctl

    #su - oracle

    $opmnctl stopall

    #reboot

    五. 运行ConfigureGC.pl命令,进行gc的配置操作

  13. 一次运行ConfigureGC.pl命令,进行gc的配置时遇到的问题描述

    [oracle@ocmdb2 bin]$ $ORACLE_HOME/perl/bin/perl $ORACLE_HOME/sysman/install/ConfigureGC.pl /oracle/OracleHomes

    Base Directory: /oracle/OracleHomes

    No file exists. Can't rename

    Starting ito execute Configuration Assistants:

    Running the configuration assistants using the following command:

    /oracle/OracleHomes/oms10g/oui/bin/runConfig.sh INV_PTR_LOC=/oracle/OracleHomes/oms10g/oraInst.loc ORACLE_HOME=/oracle/OracleHomes/oms10g ACTION=configure MODE=perform COMPONENT_XML={encap_oms.1_0_0_0_0.xml} RESPONSE_FILE=/oracle/OracleHomes/agent10g/responsefile Error occurred during initialization of VM

    Unable to load native library: /oracle/OracleHomes/oms10g/jdk/jre/lib/i386/libjava.so: symbol JVM_GetClassSignature, version SUNWprivate_1.1 not defined in file libjvm.so with link time reference

    Configuration Assistants failed with errors. Please check the above log.

    For more details also check /oracle/OracleHomes/oms10g/cfgtoollogs/cfgfw/CfmLogger_

在metalink上查询not defined in file libjvm.so ,得到一个文档(METALINK.ID=888769.1),该文档说明了这个问题发生的原因及解决办法,摘录如下:

Applies to:

Enterprise Manager Grid Control - Version: 10.2.0.3 to 10.2.0.5

This problem can occur on any platform.

Symptoms

Getting the following error message during oc4j instance configuration of Grid Control upgrade:

Error occurred during initialization of VM

Unable to load native library: OMS_HOME/jdk/jre/lib/i386/libjava.so: symbol

JVM_GetClassSignature, version SUNWprivate_1.1 not defined in file libjvm.so

Cause

1. The issue might occur if the runInstaller for upgrade is involked after setting the LD_LIBRARY_PATH.

2. The issue might occur if PATH environment variable contains pointers to other oracle products.

3. This issue will also occur if the following parameter is passed as flag with runInstaller during upgrade of OMS to 10.2.0.5:

use_prereq_checker=false

Solution

Unset LD_LIBRARY_PATH variable.

Remove reference of other oracle variables from PATH variables.

Now revert back to previous OMS version and try for upgrade.

The following parameter should not be passed with runInstaller during upgrade to 10.2.0.5:

use_prereq_checker=false

请使用浏览器的分享功能分享到微信等